> Source: https://docs.cyberelements.io/bastion/4.6/Installation/Cluster/FromAppliances/InstallEdgeGateway/

# Installation of the Edge Gateway Server

## Initial system settings

When the Edge Gateway Cluster appliance is started for the first time, an initial machine configuration wizard appears. This wizard allows you to initialize the system-specific configuration as well as those specific to the use of CyberElements Bastion.

### Systems settings

The wizard begins by asking you to select a language: ![](https://docs.cyberelements.io/bastion/4.6/img/cyberelements/CYE_InstallEdgeGatewayStandaloneAppliance_LangageSelection.png)

> **Information**
>
> The language you choose will affect both the system display language and the keyboard layout. In English, the keyboard will have a QWERTY layout, while in French it will be AZERTY.

The wizard then asks you to add a new password for the `root` system account (make sure it meets the required complexity): ![](https://docs.cyberelements.io/bastion/4.6/img/cyberelements/CYE_InstallEdgeGatewayStandaloneAppliance_RootPassword.png)

Next, you need to change the `systancia` system user account password (make sure it meets the required complexity): ![](https://docs.cyberelements.io/bastion/4.6/img/cyberelements/CYE_InstallEdgeGatewayStandaloneAppliance_SystanciaPassword.png)

Finally, you need to enter the machine name: ![](https://docs.cyberelements.io/bastion/4.6/img/cyberelements/CYE_InstallEdgeGatewayStandaloneAppliance_Hostname.png)

### Network settings

Once the system settings have been applied, the wizard switches to the machine's network settings.

The first panel asks you to choose between a static configuration and a dynamic configuration via DHCP: ![](https://docs.cyberelements.io/bastion/4.6/img/cyberelements/CYE_InstallEdgeGatewayStandaloneAppliance_NetworkConfigurationType.png)

> **Recommendation**
>
> It is recommended that you use a static configuration for the machine's network settings, particularly for the direct access feature.
> DHCP can also be used if the IP address is set at the DHCP server level.

If the static configuration is chosen, the wizard will ask for the following network settings: ![](https://docs.cyberelements.io/bastion/4.6/img/cyberelements/CYE_InstallEdgeGatewayStandaloneAppliance_IPConfiguration.png)

> **Tip**
>
> Several DNS servers can be entered (3 maximum) by separating them with spaces. Similarly, several DNS suffixes can be added by separating them with a space.

### Finalizing the initial settings

The initial configuration menu now prompts you to continue with the Edge Gateway pairing mechanism.
For this documentation, it will not be used, so it is necessary to disable the appearance of this menu at login and disable auto-connection to `root`.

To do this, start by exiting the initial configuration menu, either by selecting the `Cancel` button or by using the `Ctrl`+`C` key combination.
Then execute the following commands:

```
1
2
3
4
```

## Settings specific to CyberElements Bastion operation

Once the network settings have been applied, you still need to connect the Edge Gateway and HTML5 Gateway instances to the Mediation Controllers.
To do this, the first Edge Gateway and HTML5 Gateway instances will connect to the `MASTER` Mediation Controller, while the second instances will connect to the `SLAVE` Mediation Controller.

> **Attention!**
>
> If the Edge Gateway installation is not located within the LAN and therefore the addresses `RIP_MED_SSL_MASTER` and `RIP_MED_SSL_SLAVE` are not accessible (even with NAT).
> In that case, you will only need to configure the first instance of Edge Gateway and HTML5 Gateway, which will be set up to connect to `VIP_MED_SSL`.
>
> In this context, the Standalone virtual appliance can be used. The Cluster virtual appliance is preconfigured with two instances, whereas its Standalone counterpart is preconfigured with a single instance.

Before continuing with the following instructions, make sure you have the following items:

- Certificate for the Edge Gateway and HTML5 Gateway instances to be connected
- Certificate for the recording service
- An SSH client (on Windows, you can use [PuTTY](https://putty.org/))
- An SCP client (on Windows, the [WinSCP](https://winscp.net/eng/index.php) or [FileZilla](https://filezilla-project.org/) tools can be used)

Transfer the certificates to the `/tmp/` directory of the machine.

### Connecting Edge Gateways

Copy the certificate file from the Edge Gateway to the `/etc/ipdiva/gateway/ssl/` and `/etc/ipdiva/gateway-slave/ssl/` directories. You can do this by running commands similar to the following as `root` (replace `<CERT_NAME>` with the name of the certificate for the Edge Gateway):

```
1
2
```

Configure the Edge Gateway instances to allow them to connect to the Mediation Controllers.
The configurations differ depending on the Mediation Controller to be contacted. Perform both settings:

**Connection to the MASTER Mediation Controller**

> Edit the file `/etc/ipdiva/gateway/gateway.xml` and fill it in using the following information (several sections have been omitted and are indicated by `[…]`):
>
> ```
>  1
>  2
>  3
>  4
>  5
>  6
>  7
>  8
>  9
> 10
> ```
>
> Replace the following elements:
>
> - `_FILL_ME_WITH_SERVER_ADDRESS_:`: must be replaced with the `RIP_MED_SSL_MASTER` address, the `:` character, and the SSL router's listening port, which is normally set to `443`
> - `keyfile.pem`: must be replaced with the name of the certificate file
> - `PASSWORD`: must be replaced with the certificate password
>
> > **Example**
> >
> > Taking into account the following information:
> >
> > - `RIP_MED_SSL_MASTER` equals: `10.0.10.11`
> > - SSL Router listening port: `443`
> > - Certificate file name: `edge-gateway.p12`
> > - Certificate password: `Str0ngP@ssw0rd`
> >
> > The `/etc/ipdiva/gateway/gateway.xml` file would be configured as follows:
> >
> > ```
> >  1
> >  2
> >  3
> >  4
> >  5
> >  6
> >  7
> >  8
> >  9
> > 10
> > ```
> >
> > > **Complete file**
> > >
> > > ```
> > >  1
> > >  2
> > >  3
> > >  4
> > >  5
> > >  6
> > >  7
> > >  8
> > >  9
> > > 10
> > > 11
> > > 12
> > > 13
> > > 14
> > > 15
> > > 16
> > > 17
> > > 18
> > > 19
> > > 20
> > > 21
> > > 22
> > > 23
> > > 24
> > > 25
> > > 26
> > > 27
> > > 28
> > > 29
> > > 30
> > > 31
> > > 32
> > > 33
> > > 34
> > > 35
> > > 36
> > > 37
> > > 38
> > > 39
> > > 40
> > > 41
> > > 42
> > > 43
> > > 44
> > > 45
> > > 46
> > > 47
> > > 48
> > > 49
> > > 50
> > > 51
> > > 52
> > > 53
> > > 54
> > > 55
> > > 56
> > > 57
> > > 58
> > > 59
> > > 60
> > > 61
> > > 62
> > > 63
> > > 64
> > > 65
> > > 66
> > > 67
> > > 68
> > > 69
> > > 70
> > > 71
> > > 72
> > > 73
> > > 74
> > > 75
> > > 76
> > > 77
> > > 78
> > > 79
> > > 80
> > > 81
> > > ```
>
> Finally, start the Edge Gateway instance to load the new settings and connect it to the `MASTER` Mediation Controller:
>
> ```
> 1
> ```

**Connection to the SLAVE Mediation Controller**

> Edit the `/etc/ipdiva/gateway-slave/gateway.xml` file and complete it using the following information (several sections have been omitted and are indicated by `[…]`):
>
> ```
>  1
>  2
>  3
>  4
>  5
>  6
>  7
>  8
>  9
> 10
> 11
> 12
> ```
>
> Replace the following elements:
>
> - `@SERVER@`: must be replaced with the address `RIP_MED_SSL_SLAVE`
> - `@SERVERPORT@`: must be replaced with the SSL router's listening port, normally set to `443`
> - `keyfile.pem`: must be replaced with the name of the certificate file
> - `PASSWORD`: must be replaced with the certificate password
> - `@RPC_PORT@`: must be replaced with an available TCP port on the machine; port `9081` is commonly used
>
> > **Example**
> >
> > Taking into account the following information:
> >
> > - `RIP_MED_SSL_SLAVE` is equal to: `10.0.10.13`
> > - SSL Router listening port: `443`
> > - Certificate file name: `edge-gateway.p12`
> > - Certificate password: `Str0ngP@ssw0rd`
> > - Available RPC port: `9081`
> >
> > The `/etc/ipdiva/gateway-slave/gateway.xml` file would be configured as follows:
> >
> > ```
> >  1
> >  2
> >  3
> >  4
> >  5
> >  6
> >  7
> >  8
> >  9
> > 10
> > 11
> > 12
> > ```
> >
> > > **Complete file**
> > >
> > > ```
> > >  1
> > >  2
> > >  3
> > >  4
> > >  5
> > >  6
> > >  7
> > >  8
> > >  9
> > > 10
> > > 11
> > > 12
> > > 13
> > > 14
> > > 15
> > > 16
> > > 17
> > > 18
> > > 19
> > > 20
> > > 21
> > > 22
> > > 23
> > > 24
> > > 25
> > > 26
> > > 27
> > > 28
> > > 29
> > > 30
> > > 31
> > > 32
> > > 33
> > > 34
> > > 35
> > > 36
> > > 37
> > > 38
> > > 39
> > > 40
> > > 41
> > > 42
> > > 43
> > > 44
> > > 45
> > > 46
> > > 47
> > > 48
> > > 49
> > > 50
> > > 51
> > > 52
> > > 53
> > > 54
> > > 55
> > > 56
> > > 57
> > > 58
> > > 59
> > > 60
> > > 61
> > > 62
> > > 63
> > > 64
> > > 65
> > > 66
> > > 67
> > > 68
> > > 69
> > > 70
> > > 71
> > > 72
> > > 73
> > > 74
> > > 75
> > > 76
> > > 77
> > > 78
> > > 79
> > > 80
> > > 81
> > > ```
>
> Finally, start the Edge Gateway instance to load the new settings and connect it to the `SLAVE` Mediation Controller:
>
> ```
> 1
> ```

### Configuration of the recording service

Move the certificate for the recording service to the `/etc/ipdiva/careserver/` directory with a command similar to this (replace `<CERT_NAME>` with the name of the intended certificate):

```
1
```

Next, configure the service by modifying the following file: `/etc/ipdiva/careserver/careserver.xml`. The configuration of the file should be something like this (the following section omits many lines in the file marked with `[…]`):

```
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
```

Make the following changes:

- Change the listening IP address of the recording service to `0.0.0.0` (listens on all available IP addresses)
- Replace `recording_service.p12` with the name of the certificate for the recording service
- Replace `PASSWORD` with the password for the recording service certificate
- Add the line `<element>http://127.0.0.1:9081</element>`

> **Example**
>
> Taking into account the following information:
>
> - Certificate file name: `fqdn.edge-gateway.local.p12`
> - Certificate password: `Str0ngP@ssw0rd`
>
> The file `/etc/ipdiva/careserver/careserver.xml` would be configured as follows:
>
> ```
>  1
>  2
>  3
>  4
>  5
>  6
>  7
>  8
>  9
> 10
> 11
> 12
> 13
> 14
> 15
> ```
>
> > **Complete file**
> >
> > ```
> >  1
> >  2
> >  3
> >  4
> >  5
> >  6
> >  7
> >  8
> >  9
> > 10
> > 11
> > 12
> > 13
> > 14
> > 15
> > 16
> > 17
> > 18
> > 19
> > 20
> > 21
> > 22
> > 23
> > 24
> > 25
> > 26
> > 27
> > 28
> > 29
> > 30
> > 31
> > ```

Validate the new settings by restarting the recording service:

```
1
```

### Connecting HTML5 Gateway instances

If the HTML5 Gateway instance needs to be configured, run the following command on the Edge Gateway server as `root` to enable automatic startup of the instance:

```
1
```

Copy the certificate file from the HTML5 Gateway to the `/etc/ipdiva/html5gateway/ssl/` and `/etc/ipdiva/html5gateway-slave/ssl/` directories. You can do this by running commands similar to the following as `root` (replace `<CERT_NAME>` with the name of the certificate for the HTML5 Gateway):

```
1
2
```

Configure the HTML5 Gateway instances to allow them to connect to the Mediation Controllers.
The configurations differ depending on the Mediation Controller to be contacted. Perform both settings:

**Connection to the MASTER Mediation Controller**

> Edit the `/etc/ipdiva/html5gateway/html5gateway.xml` file and complete it using the following information (several sections have been omitted and are indicated by `[…]`):
>
> ```
>  1
>  2
>  3
>  4
>  5
>  6
>  7
>  8
>  9
> 10
> ```
>
> Replace the following elements:
>
> - `_FILL_ME_WITH_SERVER_ADDRESS_:`: must be replaced with the `RIP_MED_SSL_MASTER` address, the `:` character, and the SSL router's listening port, which is normally set to `443`
> - `keyfile.pem`: must be replaced with the name of the certificate file
> - `PASSWORD`: must be replaced with the certificate password
>
> > **Example**
> >
> > Taking into account the following information:
> >
> > - `RIP_MED_SSL_MASTER` equals: `10.0.10.11`
> > - SSL Router listening port: `443`
> > - Certificate file name: `html5-gateway.p12`
> > - Certificate password: `Str0ngP@ssw0rd`
> >
> > The `/etc/ipdiva/html5gateway/html5gateway.xml` file would be configured as follows:
> >
> > ```
> >  1
> >  2
> >  3
> >  4
> >  5
> >  6
> >  7
> >  8
> >  9
> > 10
> > ```
> >
> > > **Complete file**
> > >
> > > ```
> > >  1
> > >  2
> > >  3
> > >  4
> > >  5
> > >  6
> > >  7
> > >  8
> > >  9
> > > 10
> > > 11
> > > 12
> > > 13
> > > 14
> > > 15
> > > 16
> > > 17
> > > 18
> > > 19
> > > 20
> > > 21
> > > 22
> > > 23
> > > 24
> > > 25
> > > 26
> > > 27
> > > 28
> > > 29
> > > 30
> > > 31
> > > 32
> > > 33
> > > 34
> > > 35
> > > ```
>
> Finally, restart the HTML5 Gateway instance to load the new settings and connect it to the `MASTER` Mediation Controller:
>
> ```
> 1
> ```

**Connection to the SLAVE Mediation Controller**

> Edit the `/etc/ipdiva/html5gateway-slave/html5gateway.xml` file and complete it using the following information (several sections have been omitted and are indicated by `[…]`):
>
> ```
>  1
>  2
>  3
>  4
>  5
>  6
>  7
>  8
>  9
> 10
> 11
> 12
> ```
>
> Replace the following elements:
>
> - `@SERVER@`: must be replaced with the address `RIP_MED_SSL_SLAVE`
> - `@SERVERPORT@`: must be replaced with the SSL router's listening port, normally set to `443`
> - `keyfile.pem`: must be replaced with the name of the certificate file
> - `PASSWORD`: must be replaced with the certificate password
> - `@RPC_PORT@`: must be replaced with an available TCP port on the machine; port `9089` is commonly used
>
> > **Example**
> >
> > Taking into account the following information:
> >
> > - `RIP_MED_SSL_SLAVE` is equal to: `10.0.10.13`
> > - SSL Router listening port: `443`
> > - Certificate file name: `html5-gateway.p12`
> > - Certificate password: `Str0ngP@ssw0rd`
> > - Available RPC port: `9089`
> >
> > The `/etc/ipdiva/html5gateway-slave/html5gateway.xml` file would be configured as follows:
> >
> > ```
> >  1
> >  2
> >  3
> >  4
> >  5
> >  6
> >  7
> >  8
> >  9
> > 10
> > 11
> > 12
> > ```
> >
> > > **Complete file**
> > >
> > > ```
> > >  1
> > >  2
> > >  3
> > >  4
> > >  5
> > >  6
> > >  7
> > >  8
> > >  9
> > > 10
> > > 11
> > > 12
> > > 13
> > > 14
> > > 15
> > > 16
> > > 17
> > > 18
> > > 19
> > > 20
> > > 21
> > > 22
> > > 23
> > > 24
> > > 25
> > > 26
> > > 27
> > > 28
> > > 29
> > > 30
> > > 31
> > > 32
> > > 33
> > > 34
> > > 35
> > > ```
>
> Finally, restart the HTML5 Gateway instance to load the new settings and connect it to the `SLAVE` Mediation Controller:
>
> ```
> 1
> ```

### Configurations prior to connecting HTML5 Gateways

In order for HTML5 applications to work, additional settings must be configured **on the Mediation Controller servers**. Log in to the `MASTER` and `SLAVE` **Mediation Controller** servers as `root`.

Create or edit the `/etc/ipdiva/httpd/commonParameters.extra.conf` file to add a section equivalent to the following for the HTML5 Gateway:

```
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
```

Where:

- `URL_HTML5` must be replaced with the content of the `URL` field for the HTML5 Gateway configured in the administration console during [the HTML5 Gateway declaration](https://docs.cyberelements.io/bastion/4.6/Usage/Configuration/AdminConsole/CreateEdgeGateway/#__tabbed_1_2) (for a cluster, this is generally `HTML5-1` and `HTML5-2`).
- `GW_NAME` must be replaced by the name of an Edge Gateway located on the same server as the HTML5 Gateway. The `|` character at the end of the line **must be kept**.
- `ORGANIZATION_NAME` must be replaced by the name of the organization to which the previous Edge Gateway connects.

> **Example**
>
> For a platform with the following settings:
>
> - Organization name: `my-organization-name`
> - Declaration of the first HTML5 Gateway in the administration console:
>     - Name: `html5-gateway-1`
>     - URL: `HTML5-1`
>     - Protocol: `WebSocket`
> - Declaration of the second HTML5 Gateway in the administration console:
>     - Name: `html5-gateway-2`
>     - URL: `HTML5-2`
>     - Protocol: `WebSocket`
> - An Edge Gateway server on the first HTML5 Gateway has:
>     - An Edge Gateway service named `edge-gateway-1`
>     - An HTML5 Gateway service named `html5-gateway-1`
> - An Edge Gateway server on the second HTML5 Gateway has:
>     - An Edge Gateway service named `edge-gateway-2`
>     - An HTML5 Gateway service named `html5-gateway-2`
>
> The configuration file `/etc/ipdiva/httpd/commonParameters.extra.conf` created will be set up as follows:
>
> ```
>  1
>  2
>  3
>  4
>  5
>  6
>  7
>  8
>  9
> 10
> 11
> 12
> 13
> 14
> 15
> 16
> 17
> 18
> 19
> 20
> 21
> 22
> 23
> 24
> 25
> 26
> 27
> 28
> 29
> 30
> 31
> 32
> 33
> 34
> 35
> 36
> 37
> 38
> 39
> 40
> 41
> 42
> 43
> ```

Before applying the new settings, you must check that the new configuration does not cause any blocking errors for the Apache2 web server.
To do this, run the following command:

```
1
```

If the response is `Syntax OK` then the changes can be applied with the command below. Otherwise, check your configuration in the `/etc/ipdiva/httpd/commonParameters.extra.conf` file.

```
1
```

## Configuring an NTP time server

It is recommended to set up a time server to keep the system clock up to date. The necessary steps are described [on the NTP configuration page](https://docs.cyberelements.io/bastion/4.6/Usage/Configuration/EdgeGateway/ConfigureAnNTPServer/).
