> Source: https://docs.cyberelements.io/bastion/4.6/Installation/Standalone/FromScratch/InstallEdgeGateway/

# Installation of the Edge Gateway Server

> **Note**
>
> As a reminder, switching to `root` on Debian machines must be done with the following command:
>
> ```
> 1
> ```

## Downloading the mirror and necessary tools

The CyberElements Cleanroom 4.6 mirror and the Systancia repository signature key can be downloaded from this link (requires the creation of a client account): [Systancia Marketplace](https://www.systancia.com/my-systancia/marketplace/systancia-cleanroom/telechargements-cleanroom/)

In addition to the mirror and key, third-party tools will be required for the upgrade process:

- An SSH client (on Windows, you can use [PuTTY](https://putty.org/))
- An SCP client (on Windows, the [WinSCP](https://winscp.net/eng/index.php) or [FileZilla](https://filezilla-project.org/) tools can be used)

Use the SSH client to connect remotely to your server.

Use the SCP client to transfer files to your remote machine.

## Preparing for installation

### Configuration of the network

It is highly recommended to define a static network address for the Edge Gateway server. To do this, you first need to retrieve the name of your machine's network interface and its MAC address. Run the following command as `root`:

```
1
```

This command displays the name of the network interface, its status, its MAC address, and the interface settings.

> **Example**
>
> After the command is executed, the following output is displayed:
>
> ```
> 1
> ```
>
> The name of the network interface is `ens192` and its MAC address is `00:50:56:a1:56:9f`.

Once the network interface name and MAC address have been obtained, it is now possible to edit the machine's network configuration.
Edit the `/etc/network/interfaces` file to modify it using the following template:

```
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
```

Where:

- `INTERFACE_NAME` must be replaced by the name of the network interface previously retrieved.
- `MAC_ADDRESS` must be replaced with the MAC address previously retrieved.
- `IP_GW` must be replaced with the server's IP address.
- `NETMASK` must be replaced by the network mask associated with the IP address.
- `NETWORK_GATEWAY` must be replaced by the default network gateway.
- `IP_DNS` must be replaced by the IP address of the DNS server. If several servers need to be configured (3 maximum), separate them with a space.
- `DNS_SUFFIX` must be replaced by the DNS suffix to be used. If no suffix needs to be entered, delete the line.

> **Example**
>
> ```
>  1
>  2
>  3
>  4
>  5
>  6
>  7
>  8
>  9
> 10
> 11
> 12
> 13
> 14
> 15
> 16
> 17
> 18
> 19
> 20
> 21
> 22
> ```

Before applying the configuration, there are three more steps to complete.

The first is to install packages `resolvconf` and `bridge-utils` so that the DNS configuration specified in the previous file can be applied and the `br0` interface can be used:

```
1
```

The second is to check the configuration of the `/etc/hosts` file with regard to the machine's primary IP address (`IP_GW`).
To do this, edit the `/etc/hosts` file and check that the second line is in the following format:

```
2
```

> **Example**
>
> If the machine is named `EDGE-GATEWAY` without belonging to a domain and its IP address `IP_GW` is `172.16.10.10`, then the file would be completed as follows:
>
> ```
> 2
> ```
>
> If the machine belongs to the `DOMAIN.LOCAL` domain, then the file would be completed as follows:
>
> ```
> 2
> ```

> **Attention!**
>
> An incorrect configuration of the file may cause an error when installing the `collectd` package.

All that remains is to restart the server:

```
1
```

### Configuring the APT package manager

Upload the files downloaded from the Systancia Marketplace to the `/tmp/` directory on the server using an SCP client:

- `systancia.gpg`
- `cleanroom-4.6.1-build33.1096.D12-full.tgz`

Log in to the server as `root`, then run the following commands to unzip the Systancia repository, configure its use in APT, and authenticate it.

```
1
2
3
4
5
```

We strongly recommend disabling the installation of unnecessary packages when running `apt` commands. To do so, run the following command:

```
1
```

## Installation of the CyberElements Bastion Edge Gateway server

### Installation of basic components

Start installing the components using the following command as `root`:

```
1
```

After downloading all dependencies, a window will open asking you to select the server type. Select `gateway`:

![](https://docs.cyberelements.io/bastion/4.6/img/Cleanroom/InstallCLRScratchStandalone-Gateway.png)

> **What should I do if there is an error?**
>
> If there is an error in the information you entered, continue installing the `ipdiva-base` package and then use the following command to reconfigure the server:
>
> ```
> 1
> ```

### Installation of Edge Gateway components

Next, start the installation of the Edge Gateway-specific components using the following command:

```
1
```

The Edge Gateway server components are now installed. All that remains is to restart the machine so that the newly installed components can initialize:

```
1
```

### Installation of HTML5 Gateway components

Use the following command to start installing the HTML5 Gateway components on the Edge Gateway server:

```
1
```

Use the following command lines to enable and configure the file transfer and virtual printer features:

```
1
2
3
```

## Configuration

### Configurations prior to connecting the HTML5 Gateway

In order for HTML5 applications to work, additional settings must be configured **on the Mediation Controller server**. Log in to the **Mediation Controller** server as `root`.

Create or modify the `/etc/ipdiva/httpd/commonParameters.extra.conf` file to add a section equivalent to the following:

```
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
```

Where:

- The `URL_HTML5` must be replaced with the content of the `URL` field of the HTML5 Gateway configured in the administration console when [generating the pairing token](https://docs.cyberelements.io/bastion/4.6/Usage/Configuration/AdminConsole/CreatePairingTokenForEdgeGateway/#__tabbed_1_2).
- `GW_NAME` must be replaced by the name of an Edge Gateway located on the same server as the HTML5 Gateway. The `|` character at the end of the line **must be kept**.
- `ORGANIZATION_NAME` must be replaced by the name of the organization to which the previous Edge Gateway connects.

> **Example**
>
> For a platform with the following settings:
>
> - Organization name: `my-organization-name`
> - Declaration of the HTML5 Gateway in the administration console:
>     - Name: `html5-gateway`
>     - URL: `HTML5`
>     - Protocol: `WebSocket`
> - An Edge Gateway server has:
>     - An Edge Gateway service named `edge-gateway`
>     - An HTML5 Gateway service named `html5-gateway`
>
> The configuration file `/etc/ipdiva/httpd/commonParameters.extra.conf` created will be set up as follows:
>
> ```
>  1
>  2
>  3
>  4
>  5
>  6
>  7
>  8
>  9
> 10
> 11
> 12
> 13
> 14
> 15
> 16
> 17
> 18
> 19
> 20
> 21
> ```

Before applying the new settings, you must check that the new configuration does not cause any blocking errors for the Apache2 web server.
To do this, run the following command:

```
1
```

If the response is `Syntax OK` then the changes can be applied with the command below. Otherwise, check your configuration in the `/etc/ipdiva/httpd/commonParameters.extra.conf` file.

```
1
```

### Connecting the Edge Gateway and HTML5 Gateway

> **Attention!**
>
> If you use certificates issued by a certification authority (CA) other than Systancia's for the SSL Router component, you must add the root CA to the Edge Gateway's trusted CAs: [add the SSL Router's root CA to the trusted CAs for the Edge Gateway or HTML5 Gateway connection](https://docs.cyberelements.io/bastion/4.6/Usage/Configuration/EdgeGateway/AddANewTrustedCertificationAuthority/#global-addition-to-debian).

To configure the Edge Gateway and HTML5 Gateway instances on the server, follow the information provided in the following documentation: [Pairing the server](https://docs.cyberelements.io/bastion/4.6/Usage/Configuration/EdgeGateway/ConnectAnEdgeGatewayWithPairingToken/)
