> Source: https://docs.cyberelements.io/bastion/4.6/Usage/Configuration/MediationController/ConfigureAnNTPServer/

# Configuring an NTP server on the Mediation Controller

Using an NTP server allows you to synchronize the clocks on your machines with that of the NTP server.
This documentation covers the configuration of an NTP server for the CyberElements Bastion Mediation Controller server.

> **Prerequisites**
>
> SSH or console access + the ability to use the superuser account on the machine are required. In addition, you must ensure that the Mediation Controller server has UDP port 123 open to the desired NTP server(s).

The configuration of the NTP server(s) for the CyberElements Bastion Mediation Controller server is set in the `/etc/ntpsec/ntp.conf` file. By default, Debian servers are used as NTP servers.

To customize the NTP server(s) to be used, start by commenting out (add `#` at the beginning of the line) the use of Debian NTP servers on lines 34-37:

```
31
32
33
34
35
36
37
```

Then, starting on line 27, add one or more NTP servers. One server should be added per line in the following format: `server IP_ou_DNS_NTP`.

> **Example**
>
> To use the servers ntp1.systancia.local and 172.16.20.20, the file would be modified as follows:
>
> ```
> 26
> 27
> 28
> 29
> 30
> 31
> 32
> 33
> 34
> 35
> 36
> 37
> 38
> 39
> ```

> **Information**
>
> More information on configuring the file can be obtained with the command `man ntp.conf`.

> **Warning !**
>
> If you define fewer than 3 NTP servers, then the `minsane` parameter on line 24 must be lowered to the number of NTP servers.
> Without this modification, `ntpsec` will not correct the machine's time.
>
> > **Example**
> >
> > If only one NTP server is defined, then line 24 must be modified so that the value of `minsane` is 1:
> >
> > ```
> > 24
> > ```
> >
> > Using the configuration example above with two NTP servers configured, and therefore a value of `minsane` of 2, we would have the following global settings:
> >
> > ```
> > 22
> > 23
> > 24
> > 25
> > 26
> > 27
> > 28
> > 29
> > 30
> > 31
> > 32
> > 33
> > 34
> > 35
> > 36
> > 37
> > 38
> > 39
> > ```

After saving the new configuration, the `ntpsec` service must be restarted:

```
1
```
